Description: Uni-Solar PVL-64 12VDC 64W Flexible Amorphous Solar Panel - Solder PointsUni-Solar PVL-64 12 VDC 64 Watt Flexible Amorphous Solar Panel Peel & Stick with Solder Points. We include free MC3 Cables and Junction box for DIY installations. These panels are New Open Box. They have the bottom solder points for connections down through the roof. They are 9 feet long. If you would like the cables that you add to come up through the top of the panel it is possible by scraping off the top sheet above the solder points and connecting the wire through from the top. Then caulk the bottom solder points to insulate. We include a DIY Junction Box with 18-Inch long MC3 Connectors FREE with every panel sold. You can just remove and use the wires or if you solder a short 4" wire into solder point you can then glue the J-box to add cables. Previous customers have reported installing these panels on their corrugated metal roofs by attaching 18" x 2" metal strips every few feet on the sticky backing, leaving the white covering for the sticky backing intact where the metal strips are not present (saving the sticky material for other projects in case the panel is moved later). They then drove self-tapping screws through the protruding ends of the metal strips onto their metal roof, sealed with a proper caulk. This allowed them to install the panel with its built-in sticky backing and yet keep the installation non-permanent. Electrical Stats: Maximum Power (Pmax): 64 Watts Nominal Operating Voltage: 12 Volts Max Power Voltage (Vmpp): 16.5 Volts Max Power Current (Impp): 3.88 Amps Open Circuit Voltage (Voc): 23.1 Volts Short Circuit Current (Isc): 4.8 Amps Physical Stats: Panel Dimensions (Feet): 9.3 long x 1.29 wide Panel Dimensions (Inches): 112 long x 15.5 wide x 0.2 thick Panel Weight: 8.7 Pounds Electrical Connectors: None: Solder Points on bottom of panel Features: Lightweight & Flexible Easy Peel & Stick Application Virtually Unbreakable (No Glass) Shadow & High Heat Tolerant Frame Material: Frameless Bonding adhesive factory-installed on the back of the laminate Condition: Used New Open Box. This panel has bottom-facing solder points for connections down through a roof. We include a DIY Junction Box with 18-Inch MC3 Connectors with every panel sold, but other components may be needed depending on the desired setup, such as short wires to connect the solder points to the j-box, and/or a sealant to connect the j-box securely to the panel. It is 9 feet long by 15.5 inches wide. Please view our photo set and contact us if you have any questions.CLICK BELOW FOR MORE SOLAR OPTIONSShippingBest OffersReturns
Price: 121 USD
Location: Ventura, California
End Time: 2023-12-09T23:25:01.000Z
Shipping Cost: 25 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Return policy details:
Brand: Uni-Solar
Type: Solar Panel
Power Source: Solar
Features: Portable, Maintenance Free, Flexible, Corrosion Resistant, All Daylight Conditions
System Configuration: Hybrid
Application: Shed, Recreational Vehicle (RV), Pool, Municipal, Marine, Irrigation, Home/Garden, Electronics, Commercial, Camping/Hiking, Back-Up Power, Automotive, Aquaculture, Agriculture/Farming
Solar Technology: Amorphous (Thin-Film)
Voltage: 12 V
Resistance Properties: Fade Resistant, Corrosion Resistant, Abrasion Resistant
Current Type: DC
Power: Less Than 100 W
Current Output: Not Applicable
Charging Mode: Not Applicable
Model: PVL-64
Current Rating: Not Applicable
MPN: PVL-64
Wattage: 60-79 W
UPC: Does not apply
