Description: Remote Start Controller Kit with ATS Control Card BundleFor use in MEP-804A & MEP-804B Generators WiFi Remote Control & 2-Wire Start/StopRemote Start Features include:- 2-Wire Remote Start/Stop interface for use with ATS, Solar Charge Controller, or even a toggle switch.- Remote Start/Stop via WIFI using a cell phone, laptop, tablet, etc. Anything with WiFi and a browser!- Direct WiFi communication. No router needed. Works during power failures.** Upon request they can be configured to connect up to your wireless router so that it can be accessed from any device on your routers network. If this mode is desired you must send me an ebay message when ordering so that I can configure the controller before shipping.- 300 foot plus WiFi range. Password protected- Hundreds of systems currently in use across the USA and around the globe- Browser display of all engine and generator operating parameters on remote WIFI device. Parameters nearing extremes are highlighted in red text.--> Ambient Temperature --> Battery Voltage --> AC Voltage --> AC Output Frequency --> %Load --> Fuel Level --> Coolant Temperature --> Oil Pressure - Remotely Enable and Disable the Auxiliary Fuel Pump- Remote control of the Contactor with the Contactor state displayed- User calibration of all parameters- Data Logging of all parameters as well as engine hours and Start/Stop count. Min, Average & Max values logged every 10 seconds. - Transfer between WIFI and Manual control while running- Automatic Pre-Heat below 40 degrees F- User programmable durations and delays for all phases of start up and shutdown. Separate settings for WiFi Start/Stop and 2 Wire Start/Stop--> Pre-Heat duration--> Cranking duration --> Warm up--> Stop command to contactor open delay--> Cool down delay- Antenna and connector are IP65 rated for water resistance. - Retains full manual control of the generator thru it's front panel- Controller is conformally coated to prevent corrosion- Wire harness utilizes Mil Spec Air Frame wire rated to 300 F- Includes Controller, wire harness, antenna, drill template, Stainless Steel mounting hardware for installation & manual ATS Control Card Features include:- Designed for use with Generac RXSW 100, 150 & 200 amp Automatic Transfer Switch's.- Utility power monitoring to detect power loss- Automatically starts the MEP-804A or MEP804B and causes the ATS to switch to generator power.- Upon utility power restoration the ATS with switch back to utility power and the MEP generator will shut down.- Selectable delay to prevent false generator starting due to brief utility outage- Selectable delay to prevent false generator stopping due to brief utility power restoration Once built each system is tested in a generator simulator with a ATS connected. Additionally the Remote Start is installed in an MEP, tested and initially calibrated to assure a defect free unit.Customer phone support provided to assist with installation.Returns accepted within 30 days. Click on "See Other Items" to see the variety of MEP Generator supplies and accessories available!
Price: 900 USD
Location: Pepperell, Massachusetts
End Time: 2024-08-06T12:10:13.000Z
Shipping Cost: 18.4 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: Custom Designed
Model: MEP-804A / MEP-804B Remote Start w/ ATS Controller
MPN: Does Not Apply
Bundle Listing: No
Country/Region of Manufacture: United States
Equipment Type: Remote Start
Modified Item: No
