Intelligent Digital Magnetic Stirrer Lab Equipment Mixers 110V 10L ZNCL-TS Type

Description: 　 Digital Magnetic Stirrer 10L 110V PreAsion® ITEM DESCRIPTION Internal temperature limit protection function. 30° bevel control panel is suitable for sitting and standing angles. 50-10000ml standard or non-standard reaction bottles can be heated and stirred. Brushless dc motor, stable performance, low noise, long life, no spark generation. New shell, high temperature resistance, corrosion resistance, and good insulation performance. Knob temperature adjustment, LCD display temperature, visual and intuitive, user-friendly design. Electric heating sleeve is adopted for heating, which has the characteristics of large heating area, even heating and fast heating. The maximum surface temperature is 380℃. ITEM USAGE 1. Fix over the blender after poling screw hole, adjust height of cross clamp, place to fasten on the reaction bottle with universal, into the appropriate mixing, insert the power supply to 110 ∨, turn on the switch.2. Press the "SPEED" knob and the "r/min" window will display the SPEED. Adjust the "SPEED" knob clockwise and adjust it to the appropriate position according to the SPEED display for stirring. After the setting, the "r/min" window displays the real-time speed. When the set speed is reached, the speed display window is stable.3. Press the "HEAT" knob to display the temperature in the "℃" window. Adjust the "HEAT" knob clockwise and HEAT it to the required position according to the temperature display. After setting, the "HEAT" window displays the measured temperature. During heating, the "HEAT" window shows a jump between the measured temperature and the set temperature.4. Self-setting function: when the self-setting function is started, the heating time is the shortest, the impact temperature is the smallest and the balance is the best when the heating power and solution are irregular in different heating stages. However, the self-setting function should be reset after changing the heating medium or heating condition.5. Start self-tuning: in the normal measurement control state, press and hold the "AT" button for 8 seconds to enter the self-tuning state, and the AT light flashes in the self-tuning state.6. There is a rubber plug under the mixer, which is used to protect the external thermocouple socket from corrosion and rust and to guide the internal wire. If the plug is removed, the internal probe will be disconnected and the machine will stop working. When using external thermocouple, the plug should be unplugged and stored. Insert the plug of external thermocouple into the socket and lock the nut. Then put the stainless steel probe into the solution for temperature control heating.7. The appliance is equipped with a couple protection function, when the thermocouple is not connected properly, the display window "HHHH" green light goes off, the appliance stops heating, need to check before using. Matters needing attention: 1. Please do not dry burn.2. The instrument should be well grounded.3. For the first time, white smoke and peculiar smell are emitted, which is a normal phenomenon. Because the insulation materials contain oil and other compounds in the production process, they should be put in a ventilated place and can be used normally after disappearing for several minutes.4. The temperature resistance of the motor and magnet of the agitator is limited. Therefore, during the heating test, especially at high temperature, the instrument cannot be used for heating alone.5. At the end of high temperature heating, please turn off the heat, and leave the residual temperature for a few minutes before turning off and stirring.6. The heating part is at a higher temperature. Please be careful when working to avoid scalding.7. In case of wet hands, liquid overflow or long-term exposure to excessive humidity, induction electricity may be transmitted to the enclosure through the insulation layer. Please make sure that the grounding wire is used and pay attention to ventilation. If the electricity leakage is serious, please do not use it again. Please put it in the sun or in the oven to dry before using it, so as to avoid the danger.8. In case of power failure, please first check whether the right rear safety shall be replaced.9. When not in use for a long time, please keep the instrument clean and keep it in a dry place without corrosive gas. ITEM DETAILS ITEM INCLUDED(051035) Digital Magnetic Stirrer 10L 110V *1 SHIPPING & HANDING DETAILS Default Shipping Cost or Free Shipping Information: ▲ Default shipping cost or free shipping service is only for the customers from Canada or the lower 48 United States by Canada Post, USPS or the UPS Ground. Customers from other areas or needs other shipping ways, please contact us.▲ Buyers from Guam, Puerto Rico,Virgin Islands, American Samoa, Alaska, Hawaii, PO Boxes, APO/FPO addresses or other countries/areas, there WILL be extra shipping costs, please contact us for more detailed information.▲ Please make sure your address is valid for both UPS and USPS services. Any costs incurred because of incorrect or undeliverable address should be undertaken by buyer. Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays. Sales tax / Customs duties: Any sales taxes or Customs duties are not included. If came out, they must be undertaken by the buyer. Damage In Shipping: Email or call us First! We will work with you to get the case resolved in the fastest method. RETURN & REFUND If you are not 100% happy with your purchase, please contact Us. Please don't directly opened a request or case without informing us, or else, we will do some discounts on the warranty and other sales-services later on. Hope for your understanding. Returns & Exchanges ▲ All returns must be made within 14 days of delivery date. Items must be in new, unused condition, with all original materials included with the shipment. A partial refund may be applied for opened or damaged items, depending on the condition.▲ Items returned under the buyer’s remorse: The return shipping fee must be covered by the buyer; The original shipping cost will also be deducted from the refund. 15% restocking fee of the items purchase price will be charged. ▲ Returns that are the result of our seller's error: Buyer will receive a full refund of the item as well as shipping charges▲ All returns require a RA (Return Authorization) number that will be given by our seller. Please contact with us at first for more details. Defective & Damaged Products ▲ If product was received damaged or not as described, please send us some pictures or videos, so we could well understand your problem, then solve them for you ASAP. Besides, it's much helpful for us to claim with UPS, remind our related department to pay much more attention to packaging later on. Hope for your understanding.▲ Replacement or refund of defective or damaged products can only be returned in exchange for the exact same product, or else, the purchase price will be refunded back to your original payment method. ▲ If an item is received damaged, customer service must be contacted within 7 days of receiving your item. All returns require a RA (Return Authorization) number as above. PAYMENT eCheck Issues: Payments via eCheck do not clear immediately. Usually you will wait 5-7 days after checkout for it to clear. Then we will arrange shipments for you. WARRANTY & FEEDBACK ▲ 6 months' warranty for the machines, not for the consumables. We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.▲ Any warranty shipping cost to us is responsible by buyer.▲ Any shipping cost to buyer is responsible by the seller. ▲ We committee to the customer satisfaction and want to bring you the best purchase experience. If there is any problems, please contact us ASAP. If not, please leave us a positive feedback as it's very important for us. Thanks very much. 　

Price: 686.2 USD

Location: Rancho Cucamonga, California

End Time: 2024-02-28T04:46:57.000Z

Shipping Cost: 0 USD