ICOM AH-730 Antenna tuner EXTENSION control cable, 33 ft, 50 ft, 85 ft, 110 ft

Description: High quality EXTENSION control cable for your ICOM AH-730 antenna tuner, 18awg stranded copper wire. Don't be fooled by cheap imitations! Buy GENUINE Radiodan quality! Finally - take YOUR wonderful AH-730 further away from your operating position! For those who have an AH-730, you already know what a great tuner this is. The ICOM AH-730 is perfect for longwire antenna, inverted "L", verticals, etc. You just need to be able to use the tuner further away than the OEM cable will allow! Male / Male 4 pin connectors on both ends.I only use the highest quality materials, ALL USA sourced! NOTE: if you want extension for your AH-3/AH-4 go here ---->>> https://www.ebay.com/itm/324219681690 Four high quality 18 gauge stranded real copper wires, 100% shielded (foil) with shield runner wire that is brought out 10 inches out of the control cable at both ends (for you ground at radio and tuner as per AH-730 manual).High quality USA source for ALL parts, cable, connector and pins. RUGGED Gray PVC jacket. Same wire jacket colors as OEM. Wired straight thru, Pin 1 to 1, 2 to 2, etc. Professionally crimped MOLEX M/M connectors with heat shrink tubing as shown.We will bring out the "drain" (ground shield) runner wire to 10 inches so you can connect to "ground" on the tuner and the radio as specified in the AH-730 manual.If permanent use is desired, it is recommend to weatherproof the connection. Take your AH-730 out in the field, add our cable to your GO KIT! Need a different length? Send me a message, we can custom make any length you desire. Coax not included AH-730 not included Radios not included

Price: 99.95 USD

Location: Fort Collins, Colorado

End Time: 2024-08-13T00:25:50.000Z

Shipping Cost: 19.95 USD