DENTEX Dental Orthodontic Adhesive Kit /Mini/No-Mix Bonding/Light Cure/Blue Glue

Description: INDICATIONS FOR USE: Direct restoration for all class caries. Restoration of teeth defect and veneer. Package: REFILL: Light Cure Composite: 4g/Syringe*5 Syringe Needles : 5pcs/ box*1 Total Etching Adhesive: 5ml/Bottle*1 Etching Gel: 2.5ml/Syringe*1 Applicators Brushes: 20pcs/box*1 Net weight: 188.4g COLOR: A1,A2,A3,A3.5,B1 FEATURES & ADVANTAGES: Unique dispersion technology ensure the filler evenly distributed Radioopaque and fluoride releasing Optimal polishability and high shade stability. Excellent handling, not sticky to instrument; Suitable for most cases of restoration, extensive indication of usage. INSTRUCTIONS： (1)Preparation: isolate and prepare tooth. (2)Cleaning: rinse the preparation with water. (3)Drying: gently air dry until there is no visible water.Do not allow enamel or dentin to dry for an excessive period of time. (4)Applying Dentex Self-Etching Light Cure Adhesive (DSA): dispense 1-2 drops of DSA into a mixing well, apply enough DSA to the entire preparation with a little brush until a shiny surface is achieved and then wait for 10 seconds (DSA should not be applied too much ). Use a gentle stream of air to evaporate the solvent for 5 seconds. (If using a non self-etching adhesive, an etching step should be used according to the manufacturer's instruction). (5)Cure: light cure for 20 seconds at 500±50mW/cm2. Keep the distance to exposure surface less than 4 mm. (6)Applying Dentex light cure composite (DLC): place selected DLC into cavity preparation following by light cure. According to following table, the curing time is recommended for different depth and color shades. In order to reduce shrinkage stress, for a large cavity, an increment filling is recommended. In general, 1-2 mm increments are placed into cavity preparation from different sides and the restoration is built incrementally. Each increment is light cured for 30 seconds. (7) Finishing: after light cure, adjust restoration. (8) Polishing: use polishing strip or disc to polish the surface WARNING: Do not use this product for patient who is allergy to methylmethacrylate. Do not use this product with any material contained eugenol. PRECAUTIONS: Methmethacrylate resins may cause skin sensitization in susceptible persons. In case of contact, wash skin with soap and water. In severe situation, get medical attention. ATTENTION: To an exposed pulp, a pulp capping material such as Calcium hydroxide may be used before using this product. STORAGE: Store at 25℃ or less in a cool and dry place and avoid direct sun exposure. Recap the syringe after use. DISPOSAL: After the product is used up, dispose it as normal medical rubbish. SHELF LIFE: 3 years & Description: Orthodontic Adhesive: Designed for bonding of metal and ceramic brackets on enamel. It is of high viscosity and thus prevents bracket drifting and reduces material waste. As it is light cured extra working time is ensured and therefore accurate bracket placement can be obtained. INDICATIONS FOR USE: Direct bonding of metal and ceramic brackets Packing list: Enamel Adhesive Primer(Total-Etching) 5ml*1 bottle; Etching Gel 5ml*1 syringe; Light Cure Adhesive Paste 4g*3 syringe; Little brush 20; Syringe tip:10 STORAGE: Store at 25℃ or less in a cool and dry place and avoid direct sun exposure. Recap the syringe after use. & Specifications: 1. This product is one kind of orthodontic direct bonding system resin with aromatic bis dimethyl acrylate resin as its main material. 2. As a new-type orthodontic direct bonding system, it is convenient to use with little waste, easy to handle independently and has a favorable clinical bonding strength. 3. It consists of primer and paste with acid etchant, spatulas and small brusher as its accessories. Preparation: Clean tooth enamel surface,eliminate tooth contamination,rinse then isolate tooth and blow-dry. Etching:Etching the enamel of the tooth with acid etchant for 50 or 60 sec. Rinse and dry with clean air. If the enamel does not have a chalky appearance, pls. repeat the process; Brushing: apply a thin layer of the primer over the etched enamel with the brusher; Bonding: apply another thin layer of the paste to seal the edges, adjust the bracket within 20 sec, give pressure for 5 to 10 secand remove the excessive primer and paste after 40 to 60 sec; then do orthodontic procedures followed 5-min curing. Packaging Detail: 3 x black syringes (3.5g) 1 x primer bottle (10ml) 20 x Brushes & Warning: Ortho-Bonding primer and adhesive contains acrylate monomers. Acrylate monomers are known to produce allergic skin reactions in certain sensitive individuals. May cause eye and skin irritation. Precautions: A void eye and skin contact. Wear gloves when handing this material. Precaution:Please follow manufacturer's directions on the handing, proper use and recommendations for eye protection, when using a curing light This system is designed to be used at room temperature (20-25°C, 68-77°F)。Storage between 2-27°C/35-80°F Light Sensitive Contents: 3 x Adhesive paste Syringes (10.5g) 1 x Primer Bottle (8ml) 40 x Brushes 1 x Instruction Booklet & Specifications: 1. This product is one kind of orthodontic direct bonding system resin with aromatic bis dimethyl acrylate resin as its main material. 2. As a new-type orthodontic direct bonding system, it is convenient to use with little waste, easy to handle independently and has a favorable clinical bonding strength. 3. It consists of primer and paste with acid etchant, spatulas and small brusher as its accessories. Preparation: Clean tooth enamel surface,eliminate tooth contamination,rinse then isolate tooth and blow-dry. Etching:Etching the enamel of the tooth with acid etchant for 50 or 60 sec. Rinse and dry with clean air. If the enamel does not have a chalky appearance, pls. repeat the process; Brushing: apply a thin layer of the primer over the etched enamel with the brusher; Packaging Detail: 1 x bottle（3ml）Primer 1 x Syringes (3.5g each)Paste 1x Syringes (2.5ml)etchant Gel 7x Brushes 1xSyringe tip STORAGE: Store at 25℃ or less in a cool and dry place and avoid direct sun exposure. Recap the syringe after use. & Description: Orthodontic Adhesive: Designed for bonding of metal and ceramic brackets on enamel. It is of high viscosity and thus prevents bracket drifting and reduces material waste. As it is light cured extra working time is ensured and therefore accurate bracket placement can be obtained. INDICATIONS FOR USE: Direct bonding of metal and ceramic brackets Feature: This orthodontic adhesive provides a longer working time and a rapid setting time. Can be placed directly into bands. Excess flash is easy to clean up prior to the light curing and the cement is easy to see due to the blue color. It contains fluoride to reduce the chance of declacification. Packing list: 1 x Etchant acid Gel 2.5ml syringe; 1 xLight Cure Adhesive Paste 5g syringe; 1 x Syringe tip Box size: 17*11*2.5cm STORAGE: Store at 25℃ or less in a cool and dry place and avoid direct sun exposure. Recap the syringe after use. FDA Statement The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, you can bid on this item only if you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. Seller name:Dentistryshop City,State:SHENZHEN,China Telephone number:0755-23998164

Price: 19.79 USD

Location: Fullerton, California

End Time: 2023-08-11T01:55:47.000Z

Shipping Cost: 0 USD