AudioSource AD1002 Two Channel 50w X 2 Digital Power Amp

Description: Product highlights50 watts per channel into 8 ohms (10-30,000 Hz) at 1% THD with 2 channels driven 160 watts when bridged into a single 8-ohm load 75 watts into 4 ohms high-efficiency switching amplifier design front-panel volume and balance controls A/B speaker switching rear-panel bass and treble controls ( 12dB @ 100 Hz and 10,000 Hz) main and secondary ("Interrupt") audio line inputs with automatic source switching loop output on the main line input passes that audio signal on to another amp, giving you flexibility in designing a multi-room system signal sensing "Power On" and Trigger mode auto on select switch allows manual or signal sensing power on/off total harmonic distortion: less than 1% frequency response: 10-30,000 Hz (-2 dB, +1 dB) signal-to-noise ratio: 100 dB binding post A and B speaker connectors rack-mountable with included hardware 16-15/16"W x 2-3/16"H x 7-11/16"D 4.7 lbs. warranty: 2 years What's in the boxDigital stereo power amplifier 2 Rack-mount brackets 6 Machine screws Owner's Manual About this itemWritten by Crutchfield's Dave BarMulti-room audio power The AudioSource AD1002 stereo power amp makes a great choice for powering speakers in your multi-room sound system. This versatile amp's dual line-level inputs let you enjoy sound from one main music source plus and additional "local" audio source, switching automatically between the two. Say you have a network audio player — such as a Sonos Port — as your primary source feeding the AD1002's main input. Any time you fire up the Sonos player, your AD1002 turns itself on and sends the music to your speakers. Then, if you connect another music source like a CD player or portable music player to the secondary local "Interrupt" input, the amp will switch to that source whenever it senses an incoming music signal. When a CD stops playing, the AD1002 will automatically switch back to the Sonos. There's no need to manually switch inputs. Bridged mono mode for more power The AD1002 can power one or two pairs of speakers. Use it in stereo mode, or add a second amp and bridge them for a more powerful dual-mono setup. This amp's low-profile design makes it easy to place in a room where space is tight. Place it on a shelf or stand, or rack mount one or multiple units with the included hardware. With loop output and 12-volt trigger input and output, the AD1002 provides the power and flexibility to support a wide range of multi-room system configurations.

Price: 179 USD

Location: Charlottesville, Virginia

End Time: 2024-10-04T08:05:02.000Z

Shipping Cost: 0 USD