Description: Used working pull. Cosmetic condition is very good. Some tape residues on the front bezel. Please check for compatibility before purchasing. PLEASE NOTE: Card Reader supports *1* card at a time, despite the front plate showing the ability to insert two. Includes the following: - 3.5" PCMCIA Cardbus PC Card Reader (P/N: DR08) - PCI Interface card - 2x Interface Cables - 3.5" to 5.25" mounting kit - 4x mounting screws - 4x mounting kit screws No low-profile bracket, manual or other accessories included. -------------------------- >>> SPECIFICATIONS -------------------------- System Requirements - One PCI expansion slot on motherboard. - Windows XP, Vista, & 7. [Note: 64-bit (x64) editions of Windows XP, Vista, and 7 are not compatible] - Mac: OS X10.4 or later Package Content - 1-slot PCMCIA card reader [fits in 3.5" drive bay] - Optional 5.25" drive bay mounting kit - Low-profile PCI interface board attached with full-height (4.75" / 121 mm) metal bracket for standard PC - Two 18-inch Ultra DMA (UDMA) IDE/ATA flat ribbon cables - Drive bay mounting screw set Features - Easy installation - Support Windows XP, Vista, & 7. Windows XP, Vista, & 7 will detect this card reader and install the Windows built-in driver automatically. - Work with Windows 98SE/ME/2000 with optional IRQ steering driver. - Work with Power Mac G4 & earlier G5 (OS X10.4 or later). [Macintosh Users: This card reader works only if the Macintosh desktop, such as Power Mac G4 and earlier Power Mac - G5, has the 64-bit PCI expansion slot on Mac's motherboard. However, most of the newer Mac desktop computers do not have PCI expansion slot on motherboard. If your Mac only - has the PCI Express (PCIe) expansion slot, please purchase PCIE-CB110.] - Unsupported, but known to work with Linus with Kernel 2.4.0 and above - Unsupported, but known to work with OpenBSD 3.3 and later, should work with NetBSD and FreeBSD - One type III front access PCMCIA socket support both 32-bit CardBus PC Cards and 16-bit PC Cards. - Low-profile PCI interface card - Full-height (4.75" / 121mm) end bracket (backplate) for standard desktop PC including mini-tower. - 2/3-height (3.15" / 80 mm) end bracket (backplate) for low-profile (slimline / small form factor) desktop PC. - Complies with PCMCIA PC Card 95/97 CardBus Standard Specification. - PCMCIA 2.1, JEIDA 4.2 compliant - Complies with PCI Local Bus Specification Revision 2.2. - Intel 82365SL register compatible, ExCA compatible - 3.3V/5V operation. Supports both 3.3V 32-bit CardBus cards and 3.3V/5V dual-voltage 16-bit PCMCIA cards - No need for any ISA IRQ Board. - Support IRQ steering: native driver built in Windows XP, Vista, & 7. - ATA disk interface support. - Supports Type I, Type II, Type III 16-bit PCMCIA and 32-bit CardBus PC Card including Panasonic P2 card, ATA Flash Card, DEXIS Card, Hard Disk Drives, Linear Flash Cards (AMD, Intel, etc. chipsets), SRAM Card, Fax Modem Card (wired or wireless 3G / 3.5G AirCard), Ethernet/LAN Card, Wireless Network/LAN card (IEEE802.11b, Bluetooth), I/O card, Cardbus PC card (IEEE1394 and USB2.0), etc. - Also support CompactFlash (CF)** Card, SSFDC SmartMedia (SM)** card, Microdrive**, Memory Stick (MS) & Memory Stick Pro**, MultiMediaCard (MMC)**, Secure Digital (SD)** card, xD picture** card, etc. (** with a proper PCMCIA Adapter) - Supports all kinds of PC Card Hot-Swapping feature (insert or remove card without turning off the system) - Power saving suspend mode support. - No external power required. - 1 year warranty and free technical support. Specifications - PCI-to-PCMCIA/CardBus host bridge: Texas Instruments PCI1510 PCMCIA CardBus controller chipset - PCI interface card dimension: 4- 3/4" (120.5 mm) [L] x 1- 3/8" (35.0 mm) [W] - PCI interface card end bracket height: (a) 3.15" (80 mm) for low-profile PC, and (b) 4.75" (121 mm) for standard PC - Card reader dimensions: 5- 13/16" (147.7 mm) [L] x 4" (101.6 mm) [W] x 1- 1/16" (26.2 mm) [H] - Card reader weight: 360 g - Data transfer rate: CardBus mode 132 Mbytes/sec (Max) - PCMCIA PC card: 8/16 Bit, 8 MHz, 3.3V/5V - PCMCIA CardBus card: 32 Bit, 33 MHz, 3.3V - Operating temperature: 0oC to 70oC - Operating relative humidity: 0 - 70% - Storage temperature: -55oC to 125oC - Storage relative humidity: 0 - 95% Power: - Voltage @ PCI: DC 3.3V/ 5V/ 12V - PC Card socket: DC 3.3V/ 5V @ 1A ---------------------- >>> SALES TERMS ---------------------- Sold AS-IS, no warranty, no return. Items paid using eChecks will only be sent once payment have cleared. Typical wait time for this payment method is 8-10 business days. Faster shipping is available. Please inquire before buying. If you have any questions, feel free to ask. Thank you for your interest!
Price: 130 CAD
Location: Saint-Hyacinthe, Quebec
End Time: 2025-02-03T20:54:36.000Z
Shipping Cost: 20.2 CAD
Product Images
Item Specifics
Returns Accepted: ReturnsNotAccepted
Brand: Amtron
Model: PCD-TP-110CS
MPN: PCD-TP-110CS