42V Charger Replacement for Jetson Electric Bike and Scooter, Electric Scoote...

Description: Thanks for chosing , only provide the high quality products! **Inspect the temperature of your battery the first time use this charger** UL APPROVED Universal Lithium battery charger for 36 Lithium battery packs. 4 different ports, compatible with most product models. Compatible with Jetson and more What you get: 1*42V 2A Lithium battery charger 1*AC Power Cord with 5525 tip 1* 5525 convert to mini 3 prong(8mm) connector 1*5525 convert to standard 3 prong(12mm) connector 1*5525 convert to 0.31RCA connector The indicator light indicates the whole process： When the charger is connected to the power supply, the indicator light is green. After the interface is connected to the scooter, the indicator light changes from green to red.（if it still shows green, it is possible that the device is not successfully connected. Please confirm that the device is fully plugged in and has power on.） When the charger completes charging, the indicator light changes from red to green again. At this time, you can disconnect the charger and use the your scooter. Don't use for batteries with safety problems. Don’t use if your battery connector or polarity don't fit. Don’t use when the environment is wet. Isn't E-mobility device accessory. Don’t use as E-mobility charger. Cut-off the AC when the battery is full charged. Don’t charge when the battery is broken. 18 months warranty . Feel free to let us know if you have any problem. There may be the following reasons for the charger not working after connecting to the power supply: 1. The voltage and current of the charger do not match your battery. You have purchased a charger with wrong parameters. Please tell us the brand and model of your electric bike or the parameters and plug of the original charger. 2. Due to the limited life of the lithium battery, the charger will not work if the battery is damaged. Your battery may be damaged if it is not used for more than 12 months or 2-3 months. 3. If the green light comes on when the power is turned on, but the LED light does not turn red after the battery is connected, the connector should be loose and in poor contact, and the plug can be re inserted to maintain good contact 4. If there is a green light when plugged into the power supply, and the light goes out after connecting the electric bicycle, it is because of the internal short circuit of the electric bicycle, which causes the charger to have a self-protection function. You'd better check your e-bike battery and replace it Input: 100-240V 50/60Hz; Output: 42V 2A(works for 2A, 1.5A, 1A, 0.5A). ONLY FITS FOR 36V Lithium Battery. Don’t use for Lead-acid battery. NOT for 24V and 25.2V and 29.4V version. 4 Universal Plugs Included: 5.5mm*2.5mm Universal 2.1mm, 8mm 3 prong connector, 12mm 3 prong connector and 0.31RCA connector Safe and Smart: Multiple protections to save your battery. Sepcial designs to extend the cycle life of your. Easy to use with a LED indicator.Red light means Charging. Light turns green from Red means battery full charged. Compatibility - Jetson, Razor, Bird, gotrax, Segway, Lime. Minipro, highboy, Scooter Mijia M365,Segway ES1 ES2 ES4,Bird, Lime, Lime-S, Skip, and Spin. After Sales Support:All of our product extremely strictly QC before selling. If you have any issues for this product, please contact us by Amazon message, we will provide you satisfied solution at first time

Price: 31.03 USD

Location: Eugene, Oregon

End Time: 2024-11-28T07:32:29.000Z

Shipping Cost: 0 USD